Start with the scale that matches your plan
The KREG Multi-Mark is a compact layout tool built around three different scale settings, with both metric and imperial scaling. Before you mark anything, decide which scale you need and set the tool to it. Mixing scales mid-project is the quickest way to introduce a layout error, so pick one system for the job and stay with it.
Because the Multi-Mark carries metric and imperial scaling on the same tool, it suits plans that arrive in either format. Check the drawing or cut list first, then choose the matching scale setting. If you are working from a plan that switches units, convert once and write the converted value down rather than converting on the fly at the workpiece.
What the Multi-Mark provides for layout work
- KREG® Multi-Mark™: 3 different scale settings Multiple scale settings let you match the tool to the layout task instead of juggling separate rules.

KREG® Multi-Mark™ - KREG® Multi-Mark™: Metric and imperial scaling Useful when plans, hardware or materials arrive in either measurement system.
- KREG® Multi-Mark™: Transferring measurements and angles The tool is intended for carrying a measurement or angle from one place to another, such as from a drawing to the workpiece.
- KREG® Multi-Mark™: Marking of exact right angles Supports square layout marks where a true right angle matters.
- KREG® Multi-Mark™: Built-in spirit level Lets you check level as part of the same layout pass rather than reaching for a separate level.
Marking angles with the Multi-Mark
The Multi-Mark is designed for transferring measurements and angles and for marking exact right angles. Work through these steps in order so the angle you mark is the angle you intended.
- Identify the source angle: Find the angle on the drawing, the existing workpiece or the surface you are matching. Decide whether you are transferring it or marking a right angle.
- Set the scale: Choose the scale setting that matches your plan and confirm whether you are working in metric or imperial.
- Register the tool against a known edge: Seat the Multi-Mark against a straight, trusted reference edge so the mark starts from a consistent line.
- Transfer or mark the angle: Use the tool to carry the angle to the workpiece or to mark the right angle. Keep the tool steady against the reference edge while marking.
- Check level where it matters: The built-in spirit level lets you confirm level during the same layout pass. Use it where the workpiece or assembly needs to sit level.
Scribing circles and arcs with the Multi-Mark
The supplied product information lists transferring measurements and angles, marking exact right angles, three scale settings, metric and imperial scaling, height adjustment of cutters and saw blades, and a built-in spirit level. It does not describe a dedicated circle-scribing feature, pivot point or radius setting. Treat circle work as a layout task you set up with the tool's measuring and angle-transfer functions, not as a factory-prescribed procedure.
A practical approach is to establish the centre point and the radius on the workpiece using the Multi-Mark's scales, then mark the circle from that reference. Because the supplied information does not confirm a specific circle-scribing method for this tool, test your setup on scrap first and confirm the marked radius before committing to the final piece. If your work depends on a precise, repeatable circle jig, the Multi-Mark may not be the right primary tool for that step.
Repeat layout marking: keeping marks consistent
Repeat layout is where a small layout tool earns its place. The goal is to make the second, fifth and twentieth mark identical to the first.
- Fix the scale once: Choose one scale setting and one measurement system for the whole run. Changing scales partway through a repeat layout invites mismatched marks.
- Use a consistent reference edge: Register the tool against the same edge for every mark in the run so each mark is measured from the same baseline.
- Check the first mark before repeating: Confirm the first mark against the plan before you repeat it. A wrong first mark repeated twenty times is twenty corrections.
- Use the spirit level as a cross-check: Where the layout involves level components, the built-in spirit level lets you verify level without swapping tools.
Height adjustment of cutters and saw blades
The Multi-Mark is also listed for height adjustment of cutters and saw blades. The supplied information confirms this as a supported use but does not include a step-by-step procedure, target heights or machine-specific settings. Follow the cutter or saw blade manufacturer's instructions for setting height, and use the Multi-Mark as the measuring reference within that procedure. Do not treat the tool's inclusion of this function as a substitute for the machine manufacturer's safety guidance.
Multi-Mark measuring tips for cleaner layout
- Convert units once, on paper: If a plan mixes metric and imperial, convert the values before you start marking. The tool supports both, but your layout will be cleaner if you commit to one system at the bench.
- Keep the reference edge clean: Sawdust or finish buildup on the reference edge shifts every mark in a repeat run. Wipe the edge before you begin.
- Mark, don't cut, on the first pass: Use the Multi-Mark to lay out all marks first, then cut. This lets you catch a scale or angle error before material is removed.
- Use the right angle mark as a setup check: The exact right angle marking function is a quick way to verify that an assembly or reference edge is square before you build on it.
What the supplied information does not confirm
The supplied product record does not include care instructions, calibration procedures, a circle-scribing radius range or specific operating steps for cutter and blade height adjustment. It also does not confirm a maximum marking length or a list of compatible materials. Where your project depends on those details, check the manufacturer's documentation for the tool and the machine you are setting up rather than assuming a capability.
The Multi-Mark is a layout and marking aid. It supports transferring measurements and angles, marking exact right angles, scale-based measuring in metric and imperial, and checking level. Plan your cutting and machining operations around the tool's measuring role, and keep machine safety decisions with the machine manufacturer's instructions.

